BMW X5 - Manual (Page 81)

79 n
Overview
Controls
Maintenance
Repairs
Data
Index
Computer
Mode selection
From ignition key position 1 onwards
you can open information from the
computer using the button in the turn
signal lever. By pressing the button
briefly in the direction of the steering
column, you can open a new function
for display.
The displays appear in the following
order: outside temperature, average
fuel consumption, cruising range, aver-
age speed.
Starting with ignition key position 1,
the last active setting is displayed.
The range of available displays varies
according to your individual vehicle's
equipment.
530de228
Outside temperature and average
fuel consumption
You can change the units of measure-
ment – 7/6 – for the outside tempera-
ture display by
1. pressing and holding the trip odome-
ter reset button with the ignition
key in position 1 and
2. then turning the ignition key to 0.
At the same time the units of mea-
surement in the temperature display
of the automatic climate control will
be changed, refer to page
103 .
Refer also to page 72 .
390us126
Cruising range and average speed
The computer bases its calculations
of the cruising range on the previous
driving style and conditions.
The computer ignores any time spent
with the vehicle stationary and the
engine switched off in its average
speed calculations.
Canceling the display
If the button in the turn signal lever is
pressed briefly while the average speed
is displayed, the computer display can
be masked out.
Restarting calculations
If you continue to press the button in
the turn signal lever, the average values
which were just displayed for fuel con-
sumption and speed will be recalcu-
lated from that point. The engine must
be running for this calculation.
Computer with alphanumeric
display
*
If your vehicle has Check Control with
alphanumeric display, the system's
computer is described beginning on
page
84 and in the Owner's Manual for
the Onboard Computer.
Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG