BMW X5 - Manual (Page 99)

97 n
Overview
Controls
Maintenance
Repairs
Data
Index
Parking lamps –
side marker lamps
The front, rear and side vehicle
lighting is switched on. You can
use the parking lamps for park-
ing. For lighting on one side for parking
as an additional feature, refer to
page
98 .
Low beams
When the ignition is switched off
and the low beams are on, only
the parking lamps – side marker
lamps – remain on.
530us215
Pathway lighting:
When you activate the headlamp
flasher after parking the vehicle and
switching off the lamps, the low beams
will come on for a brief period. You may
also have this function deactivated if
you wish.
<
Lights on warning
Whenever you open the driver's door,
after having turned the ignition key to
position 0, you will hear an acoustic
signal for a few seconds to remind you
that the lamps have not been switched
off.
On vehicles with alphanumeric Check
Control
* :
The reminder is given through the
Check Control.
Daytime driving lamps *
The headlamps are automatically
switched on for daylight driving at igni-
tion key position 2.
Automatic headlamp control *
When you set the switch to this
position, the system activates
and switches on and off the low
beams in response to changes in ambi-
ent light conditions, for instance, in tun-
nels, at dawn and dusk, and in rain and
snow.
Following automatic activation the
vehicle's external lighting remains
on when you switch on the fog lamps. <
Automatic headlamp control can-
not serve as a substitute for the
driver's judgment in determining when
the vehicle lamps should be switched
on. For example, the system cannot
detect fog. To avoid safety risks, you
should always switch on the lamps
manually under these conditions.
<
You can have the sensitivity of the
headlamp control system adjusted
on your vehicle. <
Parking lamps/Low beams
Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG