LG Optimus G - Manual (Page 181)

Settings 173
Accessibility
Use the Accessibility settings to configure any accessibility plug-ins you have installed on your
phone.
Note: Requires additional plug-ins to become selectable.
PC Connection
Your device's PC connection menu lets you configure USB connection type, USB tethering, and Ask
on connection.
USB Connection Type
Opens a dialog box to choose the default connection mode when connecting your phone to a PC via
USB. Choose from Charge only, Media sync (MTP), or Camera (PTP).
Media Sync(MTP)
Allows the phone to be used as MTP phone. It allows transfer of protected content from the phone to
the PC and vice versa.
To synchronize your phone with your computer using the USB
1. Connect your phone to your computer with a USB cable.
2. Autorun will check whether MTP driver is installed or not in your PC.
3. If the driver is not installed, the MTP driver will be installed automatically and your PC will be
rebooted. After rebooting, it is possible to transfer any fi les between the phone and the PC.
Note: For Windows® XP, MTP driver is not installed by default. So Autorun will install the MTP
driver automatically after checking existence of the driver. If Windows Media Player(WMP) over
version 10.x is installed on the PC, MTP driver may be installed. For Windows® 7 except for N
edition, the driver is installed.
USB Tethering
You can use your phone to provide a data connection to a computer by activating data tethering and
connecting them with a USB cable.
To tether your phone with your computer using the USB
1. Connect your phone to your computer with a USB cable.
2. The USB connection type prompt is displayed. Tap USB tethering to confirm.