Garmin Nuvi 265W - Manual (Page 8)

2 nüvi 205 and 205W series owner’s manual
Getting Started
Before mounting the nüvi, see the Important Safety and Product Information guide for
information about laws pertaining to windshield mounting.
Step 1: Mount Your nüvi
1. Plug the vehicle power cable into the back of your nüvi.
2. Snap the cradle onto the suction cup arm.
3. Remove the clear plastic from the suction cup.
Clean and dry your windshield and the suction
cup with a lint-free cloth. Press the suction cup
firmly on the windshield.
4. Flip the lever back toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt your nüvi back until it snaps into place.
7. Plug the other end of the vehicle power cable
into a power outlet in your vehicle. Your unit
should turn on automatically if it is plugged in
and the vehicle is running.
8. If you are using a traffic receiver in Europe,
connect the external antenna to the traffic
receiver and secure the external antenna to
the windshield using the suction cups. (Traffic
receivers are included in some nüvi 205 and
205W series packages.)
Lever
Suction cup mount
Cradle
Vehicle power
cable