Panasonic KX-TG6511 - Manual (Page 31)

Programming
31 For assistance, please visit http://www.panasonic.com/help
Block calls without phone number
You can reject a call without phone
number including “Out of area”,
“Private caller”, or “Long
distance”.
1
{ MENU} i {#}{2}{4}{0}
2
{V} /{^}: Select the desired setting.
i {SAVE} i {OFF}
Viewing/editing/erasing call block
numbers
1
{ MENU} i {#}{2}{1}{7}
2
{V} /{^}: Select the desired entry.
L
To exit, press {OFF}.
3 To edit a number:
{
EDIT} i Edit the phone number.
i {SAVE} i {OFF}
To erase a number:
{
ERASE} i {V}/{^}: “Yes” i
{
SELECT} i {OFF}
Note:
L
When editing, press the desired dial
key to add, {CLEAR} to erase.
L When viewing, “Block w/o num” is
displayed if the block calls without
phone number feature is turned on. To
turn the feature off: {ERASE} i {V}
i
{SAVE} i {OFF}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L
See page 6 for information on the
available model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1 Handset:
{
MENU} i {#}{1}{3}{0}
2 Base unit:
■ KX-TG6511 series: page 3
Press and hold {LOCATOR} for
about 5 seconds. (No registration
tone)
■ KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3
Press and hold {LOCATOR} for
about 5 seconds until the
registration tone sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
3 Handset:
Press {OK}, then wait until a long
beep sounds.
Note:
L
While registering, “Base in
registering” is displayed on all
registered handsets.
L When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
TG6511(e).book Page 31 Wednesday, April 28, 2010 4:35 PM