Brake force display – BMW 335i xDrive Sedan 2014 User Manual

Page 113

Advertising
background image

and the lamp in the mirror housing flashes
brightly.
The warning stops when the turn signal is
switched off, or the other vehicle leaves the
critical zone.

System limits

The system may not be fully functional in the
following situations:

When a vehicle is approaching at a speed
much faster than your own.

In heavy fog, rain or snowfall.

In tight curves or on narrow lanes.

If the bumper is dirty or iced up, or covered
with stickers.

A Check Control message is displayed when
the system is not fully functional.

For US owners only

The transmitter and receiver units comply with
part 15 of the FCC/Federal Communication
Commission regulations. Operation is gov‐
erned by the following:
FCC ID:

NBG009014A.

Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:

This device may not cause harmful inter‐
ference, and

this device must accept any interference
received, including interference that may
cause undesired operation.

Any unauthorized modifications or changes to
these devices could void the user's authority to
operate this equipment.

Brake force display

The concept

During normal brake application, the outer
brake lamps light up.

During heavy brake application, the inner
brake lamps light up in addition.

Seite 113

Safety

Controls

113

Online Edition for Part no. 01 40 2 925 743 - II/14

Advertising