Fuses – BMW 335i xDrive Sedan 2014 User Manual

Page 213

Advertising
background image

After a battery replacement, have the battery
registered on the vehicle by your service cen‐
ter to ensure that all comfort functions are fully
available and that any Check Control mes‐
sages of these comfort functions are no longer
displayed.

Charging the battery

Note

Do not connect charging devices to the
12 volt socket in the vehicle

Do not connect battery chargers to the fac‐
tory-installed 12 volt sockets in the vehicle as
this may damage the vehicle battery due to an
increased power consumption.◀

General information

Make sure that the battery is always suffi‐
ciently charged to guarantee that the battery
remains usable for its full service life.
The battery may need to be charged in the fol‐
lowing cases:

When making frequent short-distance
drives.

If the vehicle is not used for prolonged pe‐
riods, longer than a month.

Starting aid terminals

In the vehicle, only charge the battery via the
starting aid terminals, refer to page

217

, in the

engine compartment with the engine off.

Power failure

After a temporary power loss, some equipment
needs to be reinitialized.
Individual settings need to be reprogrammed:

Seat and mirror memory: store the posi‐
tions again.

Time: update.

Date: update.

Navigation system: wait for the operability
of the navigation.

Disposing of old batteries

Have old batteries disposed of by your
service center or bring them to a recy‐
cling center.

Maintain the battery in an upright position for
transport and storage. Secure the battery so
that it does not tip over during transport.

Fuses

Hints

Replacing fuses
Never attempt to repair a blown fuse and

do not replace a defective fuse with a substi‐
tute of another color or amperage rating; this
could lead to a circuit overload, ultimately re‐
sulting in a fire in the vehicle.◀

Plastic tweezers and information on the fuse
types and locations are stored in the fuse box
in the cargo area.

In the engine compartment

1.

Use the onboard vehicle tool kit to loosen
the three cover screws, arrow 1.

2.

Pull up the holder, arrow 2.

Seite 213

Replacing components

Mobility

213

Online Edition for Part no. 01 40 2 925 743 - II/14

Advertising