Collision warning with braking function – BMW 550i xDrive Sedan 2014 User Manual

Page 115

Advertising
background image

If the camera in the mirror or the radar sen‐
sor is dirty or obscured.

During calibration of the camera immedi‐
ately after vehicle shipment.

If there is constant dimming because of
oncoming light, for example, from the sun
low in the sky.

Prewarning sensitivity

Depending on the set prewarning time, this
may result in increased false warnings.

Collision warning with

braking function

The concept

The system issues a warning if there is immi‐
nent danger of a collision and also includes a
braking function.
If the vehicle is equipped with Active Cruise
Control with Stop & Go, the collision warning is
controlled via the cruise control radar sensor in
conjunction with a camera.
The collision warning is available even if cruise
control has been deactivated.
When the vehicle is intentionally brought close
to a vehicle, the collision warning is delayed to
avoid false warnings.

General information

The system issues a two-phase warning of a
possible danger of collision with vehicles at
speeds above approx. 3 mph/5 km/h. The time
of these warnings may vary depending on the
current driving situation.

Detection range

It responds to stationary or moving objects
that are within the detection range of the radar
system.

At a glance

Button in the vehicle

Intelligent Safety button

Radar sensor

The radar sensor is located in the lower area of
the front bumper.
Always keep radar sensor clean and unob‐
structed.

Seite 115

Safety

Controls

115

Online Edition for Part no. 01 40 2 928 000 - II/14

Advertising