Changing wheels, Vehicle battery – BMW 550i xDrive Sedan 2014 User Manual

Page 238

Advertising
background image

Changing wheels

Hints

The vehicle equipment does not include a
spare tire.
When using run-flat tires or tire sealants, a tire
does not need to be changed immediately in
the event of pressure loss due to a flat tire.
The tools for changing wheels are available as
accessories from your service center.

Jacking points for the vehicle jack

The jacking points for the vehicle jack are lo‐
cated at the positions shown.

Vehicle battery

Maintenance

The battery is maintenance-free.
The added amount of acid is sufficient for the
service life of the battery.
Your service center will be glad to advise you
on questions regarding the battery.

Battery replacement

Use approved vehicle batteries only
Only use vehicle batteries that have been

approved for your vehicle by the manufacturer;
otherwise, the vehicle could be damaged and
systems or functions may not be fully availa‐
ble.◀

After a battery replacement, have the battery
registered on the vehicle by your service cen‐
ter to ensure that all comfort functions are fully
available and that any Check Control mes‐
sages of these comfort functions are no longer
displayed.

Charging the battery

Note

Do not connect charging devices to the
12 volt socket in the vehicle

Do not connect battery chargers to the fac‐
tory-installed 12 volt sockets in the vehicle as
this may damage the vehicle battery due to an
increased power consumption.◀

General information

Make sure that the battery is always suffi‐
ciently charged to guarantee that the battery
remains usable for its full service life.
The battery may need to be charged in the fol‐
lowing cases:

When making frequent short-distance
drives.

If the vehicle is not used for prolonged pe‐
riods, longer than a month.

Starting aid terminals

In the vehicle, only charge the battery via the
starting aid terminals, refer to page

242

, in the

engine compartment with the engine off.

Power failure

After a temporary power loss, some equipment
needs to be reinitialized.
Individual settings need to be reprogrammed:

Seat, mirror, and steering wheel memory:
store the positions again.

Time: update.

Date: update.

Seite 238

Mobility

Replacing components

238

Online Edition for Part no. 01 40 2 928 000 - II/14

Advertising