Dynamic driving control, Driving stability control systems – BMW 760Li Sedan 2012 User Manual

Page 102

Advertising
background image

Malfunction

A Check Control message is displayed. A mal‐
function has occurred in the self-leveling sus‐
pension. Vehicle handling may be altered and
driving comfort may be noticeably reduced. Visit
your nearest service center.

Dynamic Driving Control*

The concept

Dynamic Driving Control can be used to adjust
the driving dynamics of the vehicle. Several pro‐
grams are available for this purpose; they can be
activated using the two Dynamic Driving Control
buttons.

Operating the programs

Press the button

Program

DSC OFF
TRACTION

SPORT+
SPORT
NORMAL
COMFORT*

For Dynamic Damper Control*, the lower button
is labeled with COMFORT.

Automatic program change

The system automatically switches to NORMAL
in the following situations:

Failure of Integral Active Steering*.

Failure of Dynamic Damping Control*.

The vehicle has a flat tire.

DSC OFF

Driving stability is limited during acceleration
and when driving in bends.
Stabilizing interventions by the Integral Active
Steering* system are only performed by the rear
axle steering.

To increase vehicle stability, activate DSC again
as soon as possible.

Activating DSC OFF

Press and hold the button, but not lon‐
ger than approx. 10 seconds, until the

indicator lamp for the DSC lights up in the in‐
strument cluster and DSC OFF is displayed in
the tachometer.
The DSC system is switched off.

Deactivating DSC OFF

Press the button.
DSC OFF and the DSC indicator lamp

go out.

Indicator/warning lamps

When DSC OFF is activated, DSC OFF is dis‐
played in the tachometer.

The indicator lamp lights up: DSC OFF
is activated.

TRACTION

Maximum traction on loose road surfaces. DTC
Dynamic Traction Control is switched on. Driv‐
ing stability is limited during acceleration and
when driving in bends.

Activating TRACTION

Press the button.
TRACTION is displayed in the tachom‐

eter.
The DSC indicator lamp in the instrument clus‐
ter lights up.

Deactivating TRACTION

Press the button again.
TRACTION and the DSC indicator lamp

go out.

Indicator/warning lamps

When TRACTION is activated, TRACTION is
displayed in the tachometer.

Seite 102

102

Online Edition for Part no. 01 40 2 606 497 - 03 11 490

Driving stability control systems

Advertising