Engine stop, Parking brake, Driving – BMW 760Li Sedan 2012 User Manual

Page 66

Advertising
background image

Before leaving the car with the engine running,
set the parking brake and place the transmission
in position P or neutral to prevent the car from
moving.◀

Frequent starting in quick succession
Avoid repeated futile attempts at starting

the car and avoid starting the car frequently in
quick succession. Otherwise, the fuel is not
burned or is inadequately burned, and there is
the danger of overheating and damaging the
catalytic converter.◀

Do not wait for the engine to warm up while the
vehicle remains stationary. Start driving at mod‐
erate engine speeds.

Starting the engine

Press on the brake pedal and
press the Start/Stop button.
The engine is cranked until it
starts.

Engine stop

General information

Take the remote control with you
Take the remote control with you when

leaving the vehicle so that children, for example,
cannot operate the windows and injure them‐
selves.◀

Set the parking brake and further secure
the vehicle as required

Set the parking brake firmly when parking; oth‐
erwise, the vehicle could roll. On steep upward
and downward inclines, further secure the vehi‐
cle, for example, by turning the steering wheel in
the direction of the curb. ◀

Before driving into a car wash

In order for the vehicle to be able to roll into a car
wash, heed the information regarding Washing
in automatic car washes, refer to page

271

.

Switching off the engine

1.

Engage transmission position P with the ve‐
hicle stopped.

2.

Press the Start/Stop button.
The engine is switched off.
The radio ready state is switched on.

3.

Set the parking brake.

Parking brake

The concept

The parking brake is used to prevent the vehicle
from rolling when it is parked.

Engine switched off: the parking brake acts
on the rear wheels.

Engine running: the parking brake acts on
the disc brakes of the front and rear wheels
via the hydraulic brake system.

The parking brake can be set manually or auto‐
matically:

Manual: by pulling and pushing the switch.

Automatic: by activating Automatic Hold.

Setting

Pull the switch.
The LED lights up.

The indicator lamp lights up in red. The
parking brake is set.
Lower lamp: indicator lamp in Canadian
models

Seite 66

66

Online Edition for Part no. 01 40 2 606 497 - 03 11 490

Driving

Advertising