Collision warning with braking function, Driving comfort – BMW 550i xDrive Sedan 2011 User Manual

Page 108

Advertising
background image

Collision warning with

braking function*

The concept

The system issues a two-phase warning of a
danger of collision at speeds above approx.
10 mph/15 km/h.
The collision warning is available even if cruise
control has been deactivated.

It responds to stationary or moving objects that
are within the detection range of the radar sys‐
tem.

When the vehicle is intentionally brought into
contact with an object, the collision warning is
delayed to avoid false warnings.

Warning stages

Prewarning

This warning is issued, for example, when there
is the impending danger of a collision or the dis‐
tance to the vehicle ahead is too small.

Acute warning with braking function

Warning of the imminent danger of a collision
when the vehicle approaches another object at
a relatively high differential speed.
The acute warning prompts the driver to inter‐
vene and, if there is the danger of a collision, is
accompanied by a braking intervention.
The braking intervention is executed with lim‐
ited braking force and for a brief period only. The
intervention cannot bring the vehicle to a com‐
plete standstill.

The braking intervention is executed only if DSC
Dynamic Stability Control, refer to page

95

, is

switched on.

Adapting your speed and driving style
The acute warning does not relieve the

driver of the responsibility to adapt his or her
driving speed and style to the traffic condi‐
tions.◀

The braking intervention can be interrupted by
pressing on the accelerator or by actively mov‐
ing the steering wheel.
When towing or tow-starting the vehicle, switch
off the collision warning with braking function to
prevent undesired interventions.
The braking function is deactivated if the DSC
Dynamic Stability Control or DTC Dynamic
Traction Control is deactivated.

Switching the warning function on/off

Press the button

On: the LED lights up.

Off: the LED goes out.

The state is stored for the remote control cur‐
rently in use.

Configuring the prewarning

After the warning function is switched on, the
following can be set via the iDrive:

The prewarning can be switched on/off.

The time of the prewarning can be set.

These settings have no effect on the time of the
warning from the Active Cruise Control* that
prompts the driver to intervene or brake.

Seite 108

108

Online Edition for Part no. 01 40 2 606 469 - 03 11 490

Driving comfort

Advertising
This manual is related to the following products: