Power windows, Opening and closing – BMW 550i xDrive Sedan 2011 User Manual

Page 40

Advertising
background image

The alarm system responds in situations such
as attempts to steal a wheel or tow the car.

Interior motion sensor

The windows and glass sunroof* must be closed
for the system to function properly.

Avoiding unintentional alarms

The tilt alarm sensor and interior motion sensor
can be switched off together, such as in the fol‐
lowing situations:

In automatic car washes

In duplex garages.

During transport on car-carrying trains, at
sea or on a trailer.

When animals are to remain in the vehicle.

Switching off the tilt alarm sensor and

interior motion sensor

Press the button on the remote control
twice in succession.

The indicator lamp lights up for approx. 2 sec‐
onds and then flashes continuously.
The tilt alarm sensor and interior motion sensor
are switched off until the vehicle is locked again.

Power windows

General information

Take the remote control with you
Take the remote control with you when

leaving the vehicle so that children, for example,
cannot operate the power windows and injure
themselves.◀

Opening

Press the switch to the resistance

point.
The window opens while the switch is held.

Press the switch beyond the resist‐

ance point.
The window opens automatically.

Pressing again stops the motion.

Closing

Danger of pinching
Monitor the closing process and make

sure that the closing path of the window is clear;
otherwise, injuries may result.◀

Pull the switch to the resistance point.

The window closes while the switch is held.

Pull the switch beyond the resistance

point.
The window closes automatically.

Pressing the switch stops the motion.
Convenient operation, refer to page

32

, via the

remote control.
Convenient closing, refer to page

38

, with Com‐

fort Access*.

Pinch protection

If the closing force exceeds a specific value as a
window closes, the closing action is interrupted.
The window reopens slightly.

Danger of pinching even with pinch pro‐
tection

Even with the pinch protection system, check
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀

Window accessories
Do not install any accessories in the range

of movement of the windows; otherwise, the
pinch protection system will be impaired.◀

Seite 40

40

Online Edition for Part no. 01 40 2 606 469 - 03 11 490

Opening and closing

Advertising
This manual is related to the following products: