Wiper system, Driving – BMW 135i Convertible 2010 User Manual
Page 54
Driving
52
Unusually rapid flashing of the indicator
lamp and the turn signals indicates that
one of the turn signal bulbs has failed.
<
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
1.
Switch on the ignition, refer to page
2.
Lightly push button
1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3.
Press button
2.
4.
Lightly push button
1 in the turn indicator
lever down repeatedly until the symbol
appears in the display.
5.
Press button
2.
6.
Use button
1 to select:
>
Turn signals flash once.
>
Triple turn signal.
7.
Press button
2.
The setting is stored for the remote control
currently in use.
Wiper system
1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or
rain sensor
*
4 Cleaning windshield and headlamps
*
5 Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
Switching on wipers
Press the lever upward, arrow
1.
The lever automatically returns to its initial posi-
tion when released.
Normal wiper speed
Press once.
The system switches to operation in the inter-
mittent mode when the vehicle is stationary.
Fast wiper speed
Press twice or press beyond the resistance
point.
The system switches to normal speed when the
vehicle is stationary.
Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG