Operation by voice – BMW X6 M 2010 User Manual
Page 211
209
1.
Select the message that contains the
desired number.
2.
"Call"
Messages from the concierge service
To use the address in destination guidance
*
:
1.
Select the message.
2.
"Start guidance" or "Add as another
dest.".
3.
Start destination guidance, if necessary.
To dial a phone number:
1.
Select the message.
2.
"Call"
To save an address:
1.
Select the message.
2.
Open "Options".
3.
"Store contact in vehicle"
Deleting messages
1.
Select the message to be deleted.
2.
Open "Options".
3.
"Delete message"
Changing between mobile
phone and hands-free system
From mobile phone to hands-free
system*
You can continue calls begun outside the Blue-
tooth range of the vehicle via the handsfree sys-
tem when the engine is running or the ignition is
switched on. Depending on your mobile phone,
the system automatically switches over to the
handsfree mode.
For mobile phones that do not automatically
switch over to the handsfree mode:
Depending on the mobile phone model used,
the conversation can be continued via the
hands-free system if necessary. Refer to the
display on your mobile phone and/or your
mobile phone's operating instructions.
From handsfree system to mobile
phone
When you telephone via the handsfree system,
you can also continue the call via the mobile
phone if necessary, depending on the mobile
phone model. Act according to what is shown
on the mobile phone display, refer to the oper-
ating instructions of your mobile phone.
Alternatively, you can deactivate the Bluetooth
link, refer to page
Depending on your mobile phone model, poor
reception of the wireless communications net-
work can result in the system changing from the
hands-free system to the mobile phone.
Operation by voice*
The concept
You can operate your mobile phone without
having to remove your hands from the steering
wheel. When making your entries, you will be
supported by announcements or questions in
many cases.
The same prerequisites as for operation via
iDrive apply, refer to page
Voice commands
Activating system
1.
Briefly press the
button on the steering
wheel.
An acoustic signal indicates that you can
say commands.
2.
Say the command.
ba8_e70ag.book Seite 209 Freitag, 5. Juni 2009 11:42 11
Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG