Bmw x5: changing lamps – BMW X6 M 2010 User Manual

Page 253

Advertising
background image

M

o

bi

lity

251

Refere

nce

At a glan

ce

Co

n

tr

o

ls

Dr

ivi

n

g ti

ps

Co

mm

un

icat

io

ns

Navigation

Ente

rt

ai

nme

n

t

When performing care and maintenance on the
headlamps, please observe the information on
page

247

.

For bulbs for which replacement is not
described and for checking and adjusting

headlamp aim, please contact your BMW
Sports Activity Vehicle Center.

<

Light-emitting diodes LEDs

Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.

Do not remove the covers, and never
stare into the unfiltered light for several

hours, as irritation of the retina could result.

<

BMW X5: changing lamps

Xenon lamps

These bulbs have a very long service life and
the probability of a failure is very low. If a lamp
should nevertheless fail, you can continue driv-
ing cautiously with fog lamps

*

provided that

this is permitted by the country-specific laws.

Have work on the xenon light unit includ-
ing changing the bulb carried out only by

your BMW Sports Activity Vehicle Center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the
system, there is a danger of fatal injuries when
work is carried out improperly.

<

Halogen bulbs:

Parking lamps and roadside parking
lamps, daytime driving lamps

35-Watt bulb, H8

The bulb is pressurized. Therefore, wear
safety glasses and protective gloves.

Otherwise there is a danger of injuries if the
bulb is accidentally damaged during replace-
ment.

<

1.

Turn the cover to the left and remove.

2.

Turn the bulbs to the left, pull off the con-
nector and replace.

3.

Install in the reverse order.

Turn signals, front

24-Watt bulb, PY24W

1.

Unscrew bulb holder with bulb to the left,
refer to arrow, and replace.

2.

Install in the reverse order.

Side marker lamps, rear

To replace, please go to a BMW Sports Activity
Vehicle Center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.

Tail lamps

>

Turn signals, brake lamps: 21-watt bulb,
P21W

>

Backup lamps and brake force display: 16-
watt bulb, W16W

>

Rear lamp: LED technology.
In case of a defect, please go to a BMW
Sports Activity Vehicle Center or a work-
shop that works according to BMW repair

ba8_e70ag.book Seite 251 Freitag, 5. Juni 2009 11:42 11

Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG

Advertising