Adaptive light control – BMW Z4 sDrive35i 2010 User Manual
Page 91
89
Activating/deactivating welcome
lamps
1.
"Settings"
2.
"Lighting"
3.
"Welcome light"
Welcome lamps are activated and are
stored for the remote control currently in use.
Pathway lighting
If you activate the headlamp flasher after
parking the car, with the lights switched off,
the low beams come on and remain on for a
certain time.
You can adjust the operating period or deacti-
vate the function.
1.
"Settings"
2.
"Lighting"
3.
"Pathway light.:"
4.
Set or deactivate the duration.
The setting is stored for the remote control cur-
rently in use.
Daytime running lights
The daytime running lights light up in switch
position
0, 1 and 3. They are less powerful than
the low beams.
Activating/deactivating the daytime
running lights
1.
"Settings"
2.
"Lighting"
3.
"Daytime running lamps"
Daytime running lights are activated and
are stored for the remote control currently
in use.
Adaptive light control*
The concept
Adaptive light control is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
Activating adaptive light control
With the ignition switched on, turn the light
switch to position
3, refer to page
.
Standstill function
*
: To avoid blinding oncom-
ing traffic, adaptive light control directs light
towards the passenger side when the vehicle is
at a standstill.
Malfunction
A message appears on the Control Display.
Adaptive light control is malfunctioning or has
failed. Have the system checked as soon as
possible.
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG