BMW 135i Convertible 2009 - Manual (Page 21)

Refere
nce
At a gl
anc
e
Controls
Dr
iv
ing
tip
s
Mobi
li
ty
19
> Settings for the display in the instrument
cluster:
> 12h/24h format of the clock, refer to
page
60
> Date format, refer to page 60
> Units of measure for fuel consumption,
distance covered/remaining distances,
and temperature, refer to page
60
> Light settings:
> Pathway lighting, refer to page 74
> Daytime running lamps, refer to page 75
> Automatic climate control * : AUTO pro-
gram, cooling function and automatic recir-
culated-air control activation/deactivation,
temperature, air flow rate and distribution,
refer to page
82
> Entertainment:
> Audio volume, refer to separate Owner's
Manual
> Speed-dependent volume control, refer
to separate Owner's Manual
Central locking system
The concept
The central locking system functions when the
driver's door is closed.
The system simultaneously engages and
releases the locks on the following:
> Doors
> Luggage compartment lid
> Fuel filler door
Operating from outside
> Via the remote control
> Via the door lock *
> In cars with convenient access * , via the
handles on the driver's and front passen-
ger's doors
In addition, if the remote control is used, the
welcome lamps
* , interior lamps and the door's
courtesy lamps * are switched on or off. The
alarm system * is also armed or disarmed.
For further details on the alarm system * , refer
to page 24 .
Operating from inside
By means of the button for central locking, refer
to page
22 .
In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
addition, the hazard warning flashers and inte-
rior lamps come on.
Opening and closing:
Using the remote control
Persons or animals in a parked vehicle
could lock the doors from the inside. You
should therefore take the remote control with
you when you leave the vehicle so that the latter
can be opened from outside.
<
Unlocking
Press the button.
The interior lamps, the courtesy lamps * and the
welcome lamps come on.
Setting unlocking characteristics
You can set whether only the driver's door or
the entire vehicle is to be unlocked when the
button is pressed for the first time.
For operating principle refer to page
59 .
1. Switch on the ignition, refer to page 47 .
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
Online Edition for Part no. 01 41 2 600 853 - © 08/08 BMW AG