Self-leveling suspension, Ftm flat tire monitor, Technology for comfort, convenience and safety – BMW X5 xDrive35d 2009 User Manual

Page 102

Advertising
background image

Technology for comfort, convenience and safety

100

longer holds the vehicle after approx. 2 seconds
and it begins to roll back.

<

Self-leveling suspension*

Malfunction

The warning lamp for self-leveling
suspension lights up yellow and a
message is shown on the Control

Display. A malfunction has occurred in the self-
leveling suspension. Stop and check the vehi-
cle. If it is considerably lower at the rear than at
the front, and possibly also on one side – rear
left compared to rear right –, proceed to the
nearest BMW Sports Activity Vehicle Center or
a workshop that works according to BMW
repair procedures with correspondingly trained
personnel. Drive with appropriate caution in the
meantime. The vehicle has reduced ground
clearance and driving comfort may be notice-
ably reduced. Even if the orientation of the vehi-
cle is normal, when a malfunction is indicated
on the display, you should proceed to the near-
est BMW Sports Activity Vehicle Center or a
workshop that works according to BMW guide-
lines and uses appropriately trained personnel.

FTM Flat Tire Monitor*

The concept

The Flat Tire Monitor detects a pressure loss in
one tire by comparing the speeds of the individ-
ual wheels during driving.
In the event of a pressure loss, there is a change
in the rolling circumference and therefore the
rotation speed of the corresponding wheel. The
system detects this change and reports it as a
flat tire.

Function requirements

In order to assure the reliable reporting of a flat
tire, the system must be initialized for the cor-
rect tire inflation pressure.

The initialization must be repeated after
each time the tire inflation pressure is cor-

rected and after every tire or wheel change.

<

System limits

The Flat Tire Monitor cannot indicate
sudden severe tire damage caused by

outside factors and does not detect a natural,
even pressure drop in all four tires.

<

In the following situations, the system could be
delayed or malfunction:

>

System has not been initialized

>

Driving on snowy or slippery road surface

>

Sporty driving style: slip in the drive wheels,
high lateral acceleration

>

Driving with snow chains

*

When you are driving with the compact wheel

*

the Flat Tire Monitor is unable to function.

Initializing system

The initialization finishes during driving,
which can be interrupted at any time.

When driving resumes, the initialization is con-
tinued automatically. Do not initialize the sys-
tem when driving with snow chains

*

or with the

compact wheel

*

.

<

iDrive, for operating principle refer to page

16

.

1.

Press the

button.

This opens the start menu.

2.

Press the controller to open the menu.

3.

Select "Settings" and press the controller.

4.

Select "Vehicle / Tires" and press the con-
troller.

Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG

Advertising
This manual is related to the following products: