Turn signals/ headlamp flasher, Driving – BMW 135i Coupe 2008 User Manual

Page 64

Advertising
background image

Driving

62

>

When you use the shift paddles on the
steering wheel to shift gears in automatic
mode, the transmission switches to manual
mode.

>

If you do not accelerate or shift gears using
the shift paddles for a certain amount of
time, the transmission switches back to
automatic mode.

If the selector lever is in the M/S gear
plane, manual mode remains active.

<

>

To shift up: pull one of the shift paddles.

>

To shift down: press one of the shift pad-
dles.

Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
gear selected is briefly displayed in the instru-
ment cluster, followed by the gear actually in
use.

Overriding selector lever lock

Should the selector lever refuse to move out of
position P although the button on the selector
lever is pressed, the selector lever lock can be
overridden:

1.

Unclip the sleeve of the selector lever.

2.

Pull the sleeve up over the selector lever
until the sleeve is inside out.

3.

Using the screwdriver from the onboard
tool kit, refer to page

216

, press the red

lever while moving the selector lever to the
desired position.

Turn signals/

headlamp flasher

1 High beams
2 Headlamp flasher
3 Turn signals

Using turn signals

Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.

Unusually rapid flashing of the indicator
lamp and the turn signals indicates that

one of the turn signal bulbs has failed.

<

Indicating a turn briefly

Press the lever as far as the resistance point for
as long as you wish to indicate a turn.

Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG

Advertising
This manual is related to the following products: