BMW 135i Coupe 2008 - Manual (Page 80)

E
ve
ryth
ing un
de
r co
nt
rol
78
6. Select a text message and press the con-
troller.
To exit the display:
Select
and press the controller.
Speed limit*
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
iDrive, for operating principle refer to page
16 .
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.
4. Select "Limit" and press the controller.
Setting or changing the limit
1. Select the speed and press the controller.
2. Turn the controller to set the limit.
3. Press the controller to apply the setting.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
Activating the limit
Select "On" and press the controller.
Limit is activated.
Stopwatch
iDrive, for operating principle refer to page 16 .
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.
4. Select "Stopwatch" and press the control-
ler.
> Starting, stopping or resetting the stop-
watch
> Taking an interim time reading
Starting, stopping or resetting
> Select "Start" and press the controller.
The stopwatch starts at the displayed time.
> Select "Reset" and press the controller.
The stopwatch is reset and restarts if it was
running beforehand.
> Select "Stop" and press the controller.
This stops the timer.
Taking an interim time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG