Replacing components, Onboard toolkit, Replacing wiper blades – BMW X6 xDrive50i 2008 User Manual

Page 247: Lamps and bulbs

Advertising
background image

M

o

bi

lity

245

Re

fe

re

n

c

e

At

a

g

la

n

c

e

Co

n

tr

o

ls

D

riv

in

g ti

ps

C

o

m

m

uni

ca

ti

o

n

s

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

Replacing components

Onboard toolkit

The onboard toolkit is located in the cargo bay
under the floor panel.

Replacing wiper blades

1.

Fold down the wiper arm.

2.

Swing the wiper blade upward.

3.

Remove the wiper blade toward the wind-
shield, refer to arrow.

Lamps and bulbs

Lamps and bulbs make an essential contribu-
tion to vehicle safety. You must be duly diligent
in replacing them. BMW recommends having
your BMW Sports Activity Vehicle Center per-
form any work that you do not feel competent to
perform yourself or that is not described here.

Never touch the glass of new bulbs with
your bare fingers, as even minute

amounts of contamination will burn into the

bulb's surface and reduce its service life. Use a
clean cloth, napkin, etc., or hold the bulb by its
metal socket.

<

A replacement bulb set is available from your
BMW Sports Activity Vehicle Center.

Only replace bulbs when cool, as other-
wise you may be burned.

<

Whenever you perform any work on the
electrical system, turn off the systems/

consumers involved to prevent short circuits
from occurring. To avoid possible injury or
equipment damage when replacing bulbs,
observe any instructions provided by the bulb
manufacturer.

<

For care and maintenance of the headlamps,
please follow the instructions in the separate
Caring for your vehicle brochure.

For bulbs for which replacement is not
described and for checking and adjusting

headlamp aim, please contact your BMW
Sports Activity Vehicle Center.

<

Light-emitting diodes LEDs

Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.

Do not remove the covers, and never
stare into the unfiltered light for several

hours, as irritation of the retina could result.

<

Xenon light

These bulbs have a very long service life and
the probability of a failure is very low. If one of
these bulbs should nevertheless fail, it is possi-
ble to continue driving with great caution using
the fog lamps, provided traffic laws in your area
do not prohibit this.

Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG

Advertising
This manual is related to the following products: