Safety belts, Entering the rear – BMW 325Ci Coupe 2005 User Manual

Page 54

Advertising
background image

54

You can lock a backrest that has
been tilted forward. This makes

sense when, for instance, someone is
climbing into the rear on an incline. To
do this, press against the backrest until
you hear it click into place. To move it
back into place, you do not need to first
unlock it by moving the lever 1.

<

Lock both backrests while driving,
otherwise there is a danger of an

unexpected movement causing an
accident.

<

The indicator lamp in the instru-
ment cluster flashes when the
backrest is not locked, refer to

page

18

.

Safety belts

Always wear your safety belt

Always fasten your safety belt before
starting off. As supplemental restraint
devices, the airbags are designed to
enhance the effectiveness of the safety
belts, and not to replace them.

Always detach the rear safety
belts from their retainers before

wearing.

<

To avoid undesired movement at
high speeds, always store the rear

safety belts in their retainers when they
are not in use.

<

To close

Make sure you hear the lock engage in
the belt buckle.

The warning lamp lights up after
a short driving distance until the
driver and front passenger have

fastened their safety belts. At the same
time, an acoustic signal is sounded.
The warning lamp also lights up and the
acoustic signal sounds if the driver or
front passenger unfastens his or her
safety belt while the vehicle is in
motion.

To release

1. Press the red button in the belt

buckle

2. Hold the belt
3. Guide the belt back into its reel.

Safety belt height

The front belt system automatically
adapts to your body size when the
height of the head restraint is adjusted.
Refer to page

52

.

Entering the rear

Online Edition for Part-No. 01 41 0 158 118 - © 03/04 BMW AG

Advertising
This manual is related to the following products: