BMW X5 3.0i SAV 2005 - Manual (Page 64)

64 n Ignition lock Starting engine
Ignition key positions
0 Steering lock engaged
1 Steering lock disengaged
2 Ignition on
3 Starting engine
Steering lock engaged
The key can only be inserted or
removed in this position.
After removing the key, turn the steer-
ing wheel slightly to the left or right until
you hear the lock engage.
If the key is not removed, an acoustic
signal sounds after the driver's door is
opened.
39
0d
e
0
10
Vehicles with automatic transmis-
sion:
Only move the selector lever from posi-
tion P with the engine running.
To turn the key back to position 0 or to
remove it, first place the selector lever
in position P: interlock.
<
Steering lock disengaged
Slightly moving the steering often
makes it easier to turn the key from 0
to 1.
Individual current consumers are ready
for operation.
Starting engine
Vehicles with manual transmis-
sion:
Depress the clutch pedal when starting
the engine. If you do not, a lock pre-
vents the engine from starting.
<
Before starting
> Engage the handbrake
> Be sure that the gearshift lever is in
Neutral or the selector lever in Park if
the vehicle is equipped with an auto-
matic transmission
> Press the clutch pedal.
If the clutch pedal is not depressed,
the engine cannot be started
> In vehicles with automatic transmis-
sions, depress the footbrake.
Do not run the engine in closed
rooms, as otherwise the inhaling
of toxic exhaust gases can cause
unconsciousness and death. The
exhaust gases contain carbon monox-
ide, an odorless and colorless, but
highly toxic gas.
Never leave an unattended vehicle with
the engine running, as such a vehicle
represents a potential safety hazard.
To prevent the vehicle from rolling,
always select neutral or the position P
and engage the handbrake before leav-
ing the vehicle with the engine run-
ning.
<
When starting the engine, do not press
the accelerator pedal.
Online Edition for Part No. 01 41 0 158 701 - © 10/04 BMW AG