Self-leveling suspension, Hdc hill descent control self-leveling suspension – BMW X5 3.0i SAV 2005 User Manual

Page 98

Advertising
background image

98

n

HDC Hill Descent Control Self-leveling suspension

*

Using HDC

With manual transmission:
Use HDC in first gear and in Reverse
since the engine's braking effect is
diminished in the higher gears.

With automatic transmission:
You can use HDC in every drive posi-
tion.

In case of a malfunction

If the warning lamp in the button goes
out during HDC operation or does not
light up when the HDC is activated:
HDC is temporarily not available as
brake temperature is too high.

The warning lamp for the self-
leveling suspension comes on,
or the message SELFLEVEL

SUSP.INACT appears in the Check
Control: there is a malfunction in the
self-leveling suspension.

Stop and inspect the vehicle. If the rear
of the vehicle is visibly lower than the
front, possibly accompanied by a tilt
noticeable when you compare the left
rear with the right rear, please respond
by immediately proceeding to the near-
est BMW Sports Activity Vehicle center.
Drive with appropriate caution in the
meantime. The vehicle has reduced
ground clearance and driving comfort
may be noticeably reduced.

Even when the position of the vehicle
is normal, have the system checked as
soon as possible when a malfunction is
indicated.

Online Edition for Part No. 01 41 0 158 701 - © 10/04 BMW AG

Advertising
This manual is related to the following products: