BMW 325iT Sports Wagon 2004 - Manual (Page 142)

142
Replacement procedures
Onboard tool kit
The onboard tool kit is located beneath
the floor panel in the cargo area.
For information on raising the floor
panel, refer to page
113 .
Windshield wiper blades
Windshield
1. Switch off the engine
2. Fold the wiper arm completely out
from the windshield
3. Position the wiper blade at an angle
and pull the release spring – see
arrow
4. Fold the wiper blade down and
unhook it toward the windshield
5. Pull the wiper blade past the wiper
arm toward the top
6. Insert a new wiper blade and apply
pressure until you hear it engage.
Rear window
1. Switch off the engine
2. Fold the wiper arm completely out
from the windshield
3. Pull out the wiper blade – see arrow
4. Guide the new wiper blade into
place, continue to apply pressure
until you hear the detent engage.
Online Edition for Part-No. 01 41 0 157 605 - © 09/03 BMW AG