Safety belt height adjustment, Safety belt warning light and indicator chime, Conditions of operation – FORD 2014 E-450 v.1 User Manual

Page 41: 40 safety belts

Advertising
background image

SAFETY BELT HEIGHT ADJUSTMENT

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the seat belt
and increase the risk of injury in a crash.

Adjust the height of the shoulder belt so the belt rests across the middle
of your shoulder.

To adjust the shoulder belt height,
do the following:

1. Push the button and slide the
height adjuster up or down.

2. Release the button and pull down
on the height adjuster to make sure
it is locked in place.

SAFETY BELT WARNING LIGHT AND INDICATOR CHIME

This lamp illuminates and an audible warning will sound if the
driver’s safety belt has not been fastened when the vehicle’s
ignition is turned on.

Conditions of Operation

If...

Then...

The driver’s safety belt is not
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light
illuminates 1-2 minutes and the
warning chime sounds 4-8 seconds.

The driver’s safety belt is
buckled while the indicator
light is illuminated and the
warning chime is sounding...

The safety belt warning light and
warning chime turn off.

The driver’s safety belt is
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light and
indicator chime remain off.

40

Safety Belts

2014 Econoline (eco)
Owners Guide gf, 1st Printing, November 2012
USA
(fus)

Advertising
This manual is related to the following products: