On standard mirror, On telescoping mirror, Integrated blind spot mirrors (if equipped) – FORD 2014 E-450 v.2 User Manual

Page 75: 74 windows and mirrors

Advertising
background image

On Standard Mirror

You can tilt the spotter mirror up or
down to increase visibility. Only
apply pressure to the center of the
top or bottom edges when adjusting
the mirror.

Note: Do not apply any force to the
left or right edges. This may
damage the mirror.

On Telescoping Mirror

You can tilt the spotter mirror up or
down and also left or right to
increase visibility.

Integrated Blind Spot Mirrors (If Equipped)

WARNING: Objects in the blind spot mirror are closer than they
appear.

Blind spot mirrors have an integrated convex mirror built into the upper
outboard corner of the exterior mirrors. They are designed to assist you
by increasing visibility along the side of your vehicle.

Check the main mirror first before a lane change, then check the blind
spot mirror. If no vehicles are present in the blind spot mirror and the
traffic in the adjacent lane is at a safe distance, signal that you are going
to change lanes. Glance over your shoulder to verify traffic is clear, and
carefully change lanes.

74

Windows and Mirrors

2014 Econoline (eco)
Owners Guide gf, 2nd Printing, September 2013
USA
(fus)

Advertising
This manual is related to the following products: