Stowing the flat/spare tire, 386 wheels and tires – FORD 2013 F-550 v.2 User Manual

Page 387

Advertising
background image

4. Be sure to install all the clips on the nuts over the flanges so that
there is an even gap all around and the retention clips are fully seated.

Stowing the flat/spare tire

Note: Failure to follow spare tire stowage instructions may result in
failure of cable or loss of spare tire.

Note: If you are stowing a tire that requires reattaching it to the vehicle
with a tether, perform these steps first, then proceed with the steps
following.

1. Place the tire on end with the
valve stem facing toward the front
of the vehicle.

2. Place the tether into the bolt
holes in the wheel and attach the
lug nut using the lug winch.

386

Wheels and Tires

2013 F-250/350/450/550 (f23)
Owners Guide gf, 2nd Printing, December 2012
USA
(fus)

Advertising
This manual is related to the following products: