Car finder, Sounding a panic alarm, Opening the power liftgate (if equipped) – FORD 2011 Edge v.3 User Manual

Page 128: Memory feature (seat and mirrors) (if equipped), Locks and security

Advertising
background image

Car finder

Press

twice within three seconds. The horn will chirp and the turn

lamps will flash. It is recommended that this method be used to locate
your vehicle, rather than using the panic alarm.

Sounding a panic alarm

Press

to activate the alarm. Press again or turn the ignition to on to

deactivate.

Note: The panic alarm will only operate when the ignition is off.

Opening the power liftgate (if equipped)

Press

twice within three seconds to fully unlatch and open the

liftgate.

WARNING: Make sure all persons are clear of the liftgate area
before using power liftgate control.

In order to fully lower and latch the liftgate, press the control twice.

If the liftgate stops mid-travel, it may have detected an obstacle. Check
to ensure the liftgate swing zone is free from obstruction and reset the
power assist by manually closing the liftgate. Normal operation can then
be resumed. Liftgate open/close can be reversed by pressing

twice

within three seconds.

WARNING: Make sure the liftgate is closed to prevent exhaust
fumes from being drawn into the vehicle. This will also prevent

passengers and cargo from falling out. If you must drive with the
liftgate open, keep the vents open so outside air comes into the
vehicle.

Memory feature (seat and mirrors) (if equipped)

The integrated keyhead transmitter (IKT) or intelligent access key (IA
key) allows you to recall the memory seat and power mirrors feature.

Press

to automatically move the seat and power mirrors to the

desired memory position. The mirrors will move to the programmed
position and the seat will move to the easy entry position. The seat will
move to the final position when the ignition is switched out of off (if
easy entry feature is enabled).

Locks and Security

128

2011 Edge (edg)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: