Stopping and securing the vehicle, Removing the spare tire and jack, Tire change procedure – FORD 2011 Edge v.3 User Manual

Page 297: Roadside emergencies

Advertising
background image

Stopping and securing the vehicle

1. Park on a level surface, activate
hazard flashers and set the parking
brake.

2. Place the gearshift lever in P
(Park) and turn the engine off.

Removing the spare tire and jack

1. Lift the carpeted load floor panel
located in the rear of the vehicle.

2. Remove the spare tire cover (if
equipped).

3. Remove the wing nut securing
the spare tire by turning it
counterclockwise.

4. Remove the washer.

5. Lift and remove the temporary
spare tire from the cargo area.

6. Remove the jack assembly from
the vehicle. Loosen the bag tabs and
remove the jack and lug wrench
from the bag.

7. Fold down the wrench socket
used to loosen the lug nuts and
operate the jack.

Tire change procedure

WARNING: When one of the front wheels is off the ground, the
transmission alone will not prevent the vehicle from moving or

slipping off the jack, even if the vehicle is in P (Park).

Roadside Emergencies

297

2011 Edge (edg)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: