Fog lamp control (if equipped), High beams, Flash-to-pass – FORD 2011 F-550 v.3 User Manual

Page 87: Lights

Advertising
background image

3. Turn the ignition switch to on and then back to off.

4. Turn the headlamp control to the autolamp position. The headlamps
will turn on.

5. Wait the desired amount of time for the exit delay you want (up to
three minutes), then turn the headlamps off.

Fog lamp control (if equipped)

The headlamp control also operates
the fog lamps. The fog lamps can be
turned on only when the headlamp

control is in the

,

or

position and the high beams are not
turned on.

Pull headlamp control towards you
to turn fog lamps on. The fog lamp
indicator light

will illuminate.

High beams

Pull the lever fully past the detent
to activate. Pull the lever fully again
to deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.

Lights

87

2011 F-250/350/450/550 (f23)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: