Replacing the tire, Roadside emergencies – FORD 2010 E-450 v.3 User Manual

Page 242

Advertising
background image

• The jack is located in the rear

right-hand side of the cargo area.

3. Remove any wheel trim. Insert the tapered end of the lug nut wrench
behind wheel covers or hubcaps and twist off.

4. Loosen the wheel nut by pulling up on the handle of the lug nut
wrench about one-half turn (counterclockwise). Do not remove the
wheel lug nuts until you raise the tire off the ground.

WARNING: When one of the rear wheels is off the ground, the
transmission alone will not prevent the vehicle from moving or

slipping off the jack, even if the transmission is in P (Park).

Replacing the tire

1. Assemble the jack handle sections together and lock into the jack. Use
the jack handle to slide the jack under the vehicle.

WARNING: To lessen the risk of personal injury, do not put any
part of your body under the vehicle while changing a tire. Do not

start the engine when your vehicle is on the jack. The jack is only
meant for changing the tire.

2. Position the jack to raise the front or rear wheel.

Roadside Emergencies

242

2010 Econoline (eco)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: