Changing the tires, Changing tires, Roadside emergencies – FORD 2010 Explorer v.2 User Manual

Page 317

Advertising
background image

Fuse/Relay

Location

Fuse Amp

Rating

Protected Circuits

43

15A*

Coil on plug (4.6L engine only),
Coil tower (4.0L engine only)

44

15A*

Injectors

45B

—

Not used

45A

—

Not used

46B

—

Not used

46A

—

Not used

49

—

Fuel pump relay

50B

—

A/C clutch relay

50A

—

Fog lamps relay

51

—

Not used

52

—

Not used

53

—

One touch integrated start
(OTIS) (diode)

54

—

Trailer battery charger relay

55B

—

Front wiper relay

55A

—

PCM relay

56B

—

Starter relay

56A

—

Blower relay

* Mini Fuses ** Cartridge Fuses

CHANGING THE TIRES
If you get a flat tire while driving:
• do not brake heavily.

• gradually decrease the vehicle’s speed.

• hold the steering wheel firmly.

• slowly move to a safe place on the side of the road.
Note: The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensor, refer to Changing tires with TPMS in the Tires,
Wheels and Loading
chapter. Replace the spare tire with a road tire as
soon as possible.

Roadside Emergencies

317

2010 Explorer (exp)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: