Changing the tires, Changing tires, Roadside emergencies – FORD 2010 Fusion Hybrid v.3 User Manual
Page 246
The components are coded as follows:
Relay Location
Relay Type
Function
1
—
Not used
2
—
Not used
3
High current
micro
Blower motor
4
High current
micro
Rear window defogger
5
High current
micro
Powertrain control module
6
High current
micro
Vacuum pump cut-off
7
Solid state
Vacuum pump
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note: The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to Tire pressure monitoring system
(TPMS) in the Tires, Wheels and Loading chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
WARNING: The use of tire sealants may damage your tire
pressure monitoring system and should not be used.
WARNING: Refer to Tire pressure monitoring system (TPMS)
in the Tires, Wheels and Loading chapter for important
information. If the tire pressure monitor sensor becomes damaged, it
will no longer function.
Roadside Emergencies
246
2010 Fusion Hybrid (hfv)
Owners Guide, 3rd Printing
USA (fus)