Using the right bulbs, Replacing interior bulbs, Lights – FORD 2010 Ranger v.2 User Manual

Page 49

Advertising
background image

Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of

the lens

Take your vehicle to dealer for service if any of the above conditions of
unacceptable moisture are present.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.

Function

Number of bulbs

Trade number

Park/turn (front)

2

3157 A (amber)

Sidemarker lamps

2

194 NA

Headlamps

2

9007

Fog lamps
(if equipped)

2

9145

Hi-mount brake lamp

1

922

Rear stop/turn/tail
lamps

2

4157K or 3157K

Rear license plate
lamps

2

194

Backup lamps

2

3155

Dome lamp

1

912

Map/dome-SuperCab
(if equipped)

2

904

Map/dome-Regular
Cab (if equipped)

1

904

All replacement bulbs are clear in color except where noted.

To replace all instrument panel lights - see your authorized dealer.

Replacing interior bulbs

Check the operation of all bulbs frequently.

Lights

49

2010 Ranger (ran)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: