Replacing park/turn/sidemarker bulbs (sealed beam), Lights – FORD 2009 F-550 v.2 User Manual

Page 99

Advertising
background image

2. Remove the three screws and one
bolt from the top and bottom of the
park lamp/bezel assembly.

3. Remove the four screws and the
headlamp retaining ring from
headlamp.

4. Disconnect the electrical
connector from the headlamp.

Install the new bulb(s) in reverse order.

Replacing park/turn/sidemarker bulbs (sealed beam)

1. Make sure that the headlamps are off and open the hood.

2. Remove the three screws and one
bolt from the top and bottom of the
park lamp/bezel assembly.

3. Pull the assembly straight out
disengaging snap clip.

2009 F-250/350/450/550 (f23)
Owners Guide, 2nd Printing
USA
(fus)

Lights

99

Advertising
This manual is related to the following products: