Vehicle sensitive mode, Belt sensitive mode, Automatic locking mode – FORD 2009 F-550 v.3 User Manual

Page 183: When to use the automatic locking mode, Seating and safety restraints

Advertising
background image

2. To unfasten, push the release
button and remove the tongue from
the buckle.

Vehicle sensitive mode

Combination lap and shoulder belts in normal retractor mode allow free
shoulder belt length adjustment to your movements and locking in
response to vehicle movement. For example, if the driver brakes
suddenly or turns a corner sharply, or the vehicle receives an impact of
approximately 5 mph (8 km/h) or more, the combination safety belts will
lock to help reduce forward movement of the driver and passengers.

Belt sensitive mode

Combination lap and shoulder belts can also be made to lock manually by
quickly pulling on the shoulder belt.

Automatic locking mode

When to use the automatic locking mode

In this mode, the shoulder belt is automatically pre-locked. The belt will
still retract to remove any slack in the shoulder belt. The automatic
locking mode is not available on the driver safety belt.

This mode should be used any time a child safety seat (except a
booster) is installed in a passenger front or outboard rear seating
position (if equipped). Children 12 years old and under should be
properly restrained in the rear seat whenever possible. Refer to Safety
restraints for children
or Safety seats for children later in this chapter.

2009 F-250/350/450/550 (f23)
Owners Guide, 3rd Printing
USA
(fus)

Seating and Safety Restraints

183

Advertising
This manual is related to the following products: