Brake fluid, Maintenance and specifications – FORD 2008 E-450 v.3 User Manual

Page 263

Advertising
background image

5. Recheck the fluid level on the dipstick. Do not add fluid if the level is
between the arrows in the FULL COLD range.

6. If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the FULL COLD range. Be sure to put the
dipstick back in the reservoir. Refer to Maintenance product
specifications and capacities
in this chapter for the proper fluid type.

BRAKE FLUID
• E-150/E-350 Single Rear Wheel

• E-350/E-450 Dual Rear Wheel

The fluid level will drop slowly as the brakes wear, and will rise when the
brake components are replaced. Fluid levels between the “MIN” and
“MAX” lines are within the normal operating range; there is no need to
add fluid. If the fluid levels are outside of the normal operating range the
performance of the system could be compromised; seek service from
your authorized dealer immediately.

2008 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

263

Advertising
This manual is related to the following products: