Displaying a logo (no show), Selecting a logo at startup, P100) – Canon SX7 MARKII User Manual
Page 100: Ow (p100), No show, Projector on
100
SE
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Displaying a Logo (NO SHOW)
[NO SHOW]
You can display a user logo on a screen when
the projected image is blackened out tempo-
rarily by pressing the [NO SHOW] button on the
remote control. (SX60/X700)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Logo at Startup
[Projector on]
You can display a specified logo on a screen
from the moment the projector is turned on to the
moment it is ready for projection.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
User screen settings
NO SHOW
Displays no logo (black screen).
Displays no logo (blue background).
Displays a logo captured on the
[Logo capture] screen. (SX60/X700)
z You cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen. (SX60/X700)
DIGITAL PC
ANALOG PC
DIGITAL VIDEO
COMP./SCART
VIDEO/S-VIDEO
(SX60/X700)
Black
Blue
User logo
Display settings
User screen settings
Projector on
Displays the Canon logo captured
at the factory.
Projects an image immediately after
turning on the projector.
Displays a logo captured on the
[Logo capture] screen. (SX60/X700)
z You cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen. (SX60/X700)
DIGITAL PC
ANALOG PC
DIGITAL VIDEO
COMP./SCART
VIDEO/S-VIDEO
(SX60/X700)
Canon logo
Skip
User logo