Canon HDMI SX800 - Manual (Page 56)

Adjusting Image
56
Adjusting the Image Size
Use the ZOOM button to adjust the size of the projecting image.
Change the projector installation position if your desired image is too large or too small to
adjust it with the zoom function. (
P33 )
1
Press the ZOOM button to pop up a window shown at the lower right.
2
Press the pointer buttons to adjust the image size.
3
When the image size is determined, press the OK button or the ZOOM button.
Remote control Top control
[ ] / [ ]: Rough adjustment.
[<] / [>]: Fine adjustment.
<
<
Remote control Top control