To turn off, To resume speed – Dodge 2011 Durango - Owner Manual User Manual

Page 175

Advertising
background image

To Turn Off

The system will turn off and erase the set speed in
memory if:
• You push the ON/OFF button.
• You turn OFF the ignition.
• You switch to Four-Wheel Drive Low.

To Resume Speed

Press the RES + button and release. Then remove your
foot from the accelerator pedal. The EVIC will display the
last set speed.

NOTE:

You can resume ACC from a minimum of

20 mph (32 km/h).

WARNING!

The Resume function should only be used if traffic
and road conditions permit. Resuming a set speed
that is too high or too low for prevailing traffic and
road conditions could cause the vehicle to accelerate
or decelerate too sharply for safe operation. This
could cause a collision and/or serious injury.

Adaptive Cruise Control Cancelled

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

173

Advertising
This manual is related to the following products: