Setting the time, Audio settings, Electronics – Dodge 2012 Charger_SRT - User Guide User Manual

Page 43

Advertising
background image

Setting the Time

• Model 8.4N synchronizes time automatically via GPS, so should not require any

time adjustment. If you do need to set the time manually, follow the instructions
below for Model 8.4.

• For Model 8.4, turn the unit on, then touch the time display at the top of the

screen. Touch Yes.

• If the time is not displayed at the top of the screen, touch More soft-key and then

Settings soft-key. In the Settings screen, touch the Clock soft-key, then check or
uncheck this option.

• Touch + or – next to Set Time Hours and Set Time Minutes to adjust the time.

• If these features are not available, uncheck the Sync with GPS box.

• Touch X to save your settings and exit out of the Clock Setting screen.

Audio Settings

• Touch the Audio soft-key to activate the Audio settings screen to adjust

Balance\Fade, Equalizer, and Speed Adjusted Volume.

• You can return to the Radio screen by touching the X located at the top right.

Balance/Fade

• Touch the Balance/Fade soft-key to Balance audio between the front speakers or

fade the audio between the rear and front speakers.

• Touching the Front, Rear, Left, or Right soft-keys or touch and drag the red

Speaker Icon to adjust the Balance/Fade.

Equalizer

• Touch the Equalizer soft-key to activate the Equalizer screen.

• Touch the + or - soft-keys, or by touching and dragging over the level bar for each

of the equalizer bands. The level value, which spans between ±9, is displayed at
the bottom of each of the Bands.

Speed Adjusted Volume

• Touch the Speed Adjusted Volume soft-key to activate the Speed Adjusted Volume

screen. The Speed Adjusted Volume is adjusted by touching the + and - buttons or
by touching and dragging over the level bar. This alters the automatic adjustment
of the audio volume with variation to vehicle speed.

ELECTRONICS

41

Advertising
This manual is related to the following products: