Rearming the system, To arm the system – Dodge 2012 Durango - Owner Manual User Manual

Page 23

Advertising
background image

audio and visual signals, the horn will sound, the head-
lights will turn on, park lamps and/or turn signals will
flash repeatedly for three minutes. If the disturbance is
still present (driver’s door, passenger door, other doors,
ignition) after three minutes, the headlights, park lamps
and/or turn signals will flash for an additional 15 min-
utes.

NOTE:

The Panic and Security alarms are quite differ-

ent. Please take a moment to activate the Panic and the
Security modes to hear the differences in the horn. In case
one should go off in the future, you will need to know
which mode has been activated in order to deactivate it.

Rearming The System

If something triggers the alarm, and no action is taken to
disarm it, the Vehicle Security Alarm will turn off the
horn after three minutes, turn off all of the visual signals
after 15 minutes, and then the Vehicle Security Alarm will
rearm itself.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:

1. Remove the key from the ignition system (refer to

ЉStarting ProceduresЉ in ЉStarting And OperatingЉ for
further information).

• For vehicles equipped with Keyless Enter-N-Go, make
sure the vehicle ignition system is

ЉOFFЉ.

• For vehicles not equipped with Keyless Enter-N-Go,
make sure the vehicle ignition system is

ЉOFFЉ and the

key is physically removed from the ignition.

2. Perform one of the following methods to lock the
vehicle:

• Press LOCK on the interior power door lock switch
with the driver and/or passenger door open.

• Press the LOCK button on the exterior Passive Entry
Door Handle with a valid Key Fob available in the same

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

21

Advertising
This manual is related to the following products: