Shifting procedure – Dodge 2012 Durango - Owner Manual User Manual

Page 456

Advertising
background image

For additional information on the appropriate use of each
transfer case mode position, see the information below:

AWD AUTO
All-Wheel Drive Auto Range - This range sends power to
the rear wheels. The all–wheel drive system will be
automatically engaged when the vehicle senses a loss of
traction. Additional traction for varying road conditions.

LOW RANGE
All-Wheel Drive Low Range - This range provides low
speed all-wheel drive. Locks the front and rear drive-
shafts together forcing the front and rear wheels to rotate
at the same speed. Additional traction and maximum
pulling power for loose, slippery road surfaces only. Do
not exceed 25 mph (40 km/h).

N
Neutral - This range disengages both the front and rear
driveshafts from the powertrain. To be used for flat

towing behind another vehicle. Refer to “Recreational
Towing” in “Starting and Operating” for further
information.

Shifting Procedure

NOTE:

• If any of the requirements to select a new transfer case

position have not been met, the transfer case will not
shift. The position indicator light for the previous
position will remain ON, and the newly selected
position indicator light will continue to flash until all
the requirements for the selected position have been
met. To retry a shift: return the control knob back to the
original position, make certain all shift requirements
have been met, wait five seconds and try the shift
again.

• If all the requirements to select a new transfer case

position have been met, the current position indicator
light will turn OFF, the selected position indicator light

454

STARTING AND OPERATING

Advertising
This manual is related to the following products: