Dodge 2013 Challenger_SRT - User Guide - Manual (Page 115)

FLUIDS AND CAPACITIES - SRT8
Component Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant– 6.4L Engine We recommend you use
MOPAR® Antifreeze/ Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive Tech-
nology).
15.2 Quarts (14.4 Liters) In-
cludes heater and coolant
recovery bottle filled to MAX
level.
Engine Oil With Filter– 6.4L
Engine
For best performance and
maximum protection under
all types of operating condi-
tions, the manufacturer only
recommends full synthetic
engine oils that meet the
American Petroleum Institute
(API) categories of SM or SM/
CF. The manufacturer recom-
mends the use of a full syn-
thetic SAE 0W-40 engine oil
or equivalent.
7 Quarts (6.6 Liters)
Engine Oil Filter– 6.4L Engine We recommend you use
MOPAR® Engine Oil Filters.
-
Spark Plugs– 6.4L Engine We recommend you use
MOPAR® Spark Plugs (Gap
0.043 in [1.1 mm]) .
-
Axle Rear (SRT8) We recommend you use
MOPAR® Synthetic Gear Lubri-
cant SAE 75W–90 (API GL-5)
with MOPAR® Friction Modifier
– Hypoid Gear Additive.
-
Power Steering Reservoir
(SRT8)
We recommend you use
MOPAR® Power Steering Fluid
+ 4, or MOPAR® ATF+4® Auto-
matic Transmission Fluid.
-
Fuel Selection– 6.4L Engine We recommend you use Pre-
mium Unleaded 91 Octane or
higher.
19.1 Gallons (72 Liters)
(Approximate)
Manual Transmission – If
Equipped
We recommend you use
MOPAR® ATF+4® Automatic
Transmission Fluid.
-
Automatic Transmission – If
Equipped
We recommend you only use
MOPAR® ATF+4® Automatic
Transmission Fluid.
Failure to use ATF+4 fluid
may affect the function or
performance of your trans-
mission.
-
MAINTAINING YOUR VEHICLE
113