Using homelink, Electronics – Dodge 2013 Challenger_SRT - User Guide User Manual

Page 77

Advertising
background image

NOTE:
• If the EVIC displays “DID NOT TRAIN” repeat from Step 2.
• To program the two remaining HomeLink® buttons, repeat each step for each remaining

button. DO NOT erase the channels.

Using HomeLink®
• To operate, press and release the programmed HomeLink® button. Activation will now

occur for the programmed device (i.e., garage door opener, gate operator, security

system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the

device may also be used at any time.

WARNING!

• Your motorized door or gate will open and close while you are programming the

universal transceiver. Do not program the transceiver if people or pets are in the path
of the door or gate.

• Do not run your vehicle in a closed garage or confined area while programming the

transceiver. Exhaust gas from your vehicle contains Carbon Monoxide (CO) which is
odorless and colorless. Carbon Monoxide is poisonous when inhaled and can cause
you and others to be severely injured or killed.

ELECTRONICS

75

Advertising
This manual is related to the following products: