Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 108)

6. Touch Go!.
7. Touch Add as a Via Point.
Changing The Destination Of The Active Route
Before you can change destinations, you must be navi-
gating a route.
1. Touch to return to the main menu.
2. Touch Where To?.
3. Search for the location.
4. Touch Go!.
5. Touch Set as a New Destination.
Taking A Detour
While navigating a route, you can use detours to avoid
obstacles ahead of you, such as construction zones.
NOTE: If the route you are currently taking is the only
reasonable option, the navigation system might not cal-
culate a detour.
1. While navigating a route, touch .
2. From the main menu, touch Detour.
Stopping The Route
1. While navigating a route, touch .
2. From the main menu, touch Stop.
FINDING LOCATIONS
The Where To? menu provides several different catego-
ries you can use to search for locations. To perform a
simple search, see the “Getting Started” section.
8
NAVIGATION (Uconnect® 430N Only) 107