Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 114)

Using The Map Buttons
1. From the main menu, touch Where To? > Browse Map.
2. Touch anywhere on the map.
• Touch and to zoom in and out.
• Touch to switch between 2D and 3D views.
• Touch
to rotate the view.
Browsing The Map By Touching The Screen
• Touch an area on the map to select a location.
• An information box appears next to the location.
• Touch and drag the map to view different parts of the
map.
• Tap the map twice to zoom in and center on a location.
Finding a Location Using the Map
1. From the main menu, touch Where To? > Browse
Map .
2. Touch a location.
An information box appears next to the location.
3. Touch the information box.
4. Select an option:
• Touch
> Save .
5. Touch Go!.
Setting a Simulated Location
You can use the GPS simulator to select another location,
near which you can search for and save points of interest.
This may be helpful when planning trips.
1. From the main menu, touch Tools > Settings > System
> GPS Simulator > On .
8
NAVIGATION (Uconnect® 430N Only) 113