Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 127)

You can manually load custom points of interest (POI)
databases, available from various companies on the In-
ternet. Some custom POI databases contain alert infor-
mation for points such as safety cameras and school
zones. The navigation system can notify you when you
approach one of these points. You are responsible for
ensuring that your use of safety camera information is
lawful in your area.
WARNING
Garmin and Chrysler Group LLC are not responsible for
the consequences of using custom POI databases, or for
the accuracy of custom POI databases.
After downloading your POI database, use the Garmin
POI Loader to install the POIs onto a USB mass storage
device. Use the USB mass storage device to load the POIs.
The POI Loader is available at www.garmin.com/
products/poiloader. Refer to the POI Loader Help file for
more information; click Help to open the Help file. The
file name can only be POI.gpi. No other file name or
extension should be used.
NOTE: Each time you load custom POIs to the naviga-
tion system, any other custom POIs already saved in the
system will be overwritten.
Finding Custom PoIs
You can view a list of the custom POIs loaded in your
navigation system.
• Touch Where To? > Extras > Custom POIs.
Deleting Custom PoIs
1. Touch Tools > My Data > Delete Custom POI(s).
2. Touch Yes to confirm.
NOTE: All custom POIs will be deleted from your
navigation system.
126 NAVIGATION (Uconnect® 430N Only)